Confused about cosmetic dentistry options?

Dec 4th, 2009 West London dentist creates dental restoration in minutes with CEREC technology Get in touch

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

West London dentist creates dental restoration in minutes with CEREC technology

CEREC technology at West London dentist revolutionises dental restorations

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

West London dentist creates dental restoration in minutes with CEREC technology

CEREC technology at West London dentist revolutionises dental restorations

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

West London dentist creates dental restoration in minutes with CEREC technology

CEREC technology at West London dentist revolutionises dental restorations

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

West London dentist creates dental restoration in minutes with CEREC technology

CEREC technology at West London dentist revolutionises dental restorations

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

West London dentist creates dental restoration in minutes with CEREC technology

CEREC technology at West London dentist revolutionises dental restorations

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

West London dentist creates dental restoration in minutes with CEREC technology

CEREC technology at West London dentist revolutionises dental restorations

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

West London dentist creates dental restoration in minutes with CEREC technology

CEREC technology at West London dentist revolutionises dental restorations

CEREC is a state-of-the-art dental restoration product that has allowed dentists to use computer-aided technology to produce ceramic inlays and crowns. Utilising new technologies such as 3D imaging, digital x-rays and CAD/CAM, CEREC has allowed teeth restorations to be carried out in only a single visit to a West London dentist rather than taking several appointments.

CEREC works by creating a digital three-dimensional image of the patient’s mouth that can be stored on a computer. This image can then be used to design a computer-generated approximation of the ceramic tooth or inlay. When satisfied with the approximation, the dentist can sculpt the restoration from a single piece of porcelain using a diamond head cutter under computer control.

This new technology has several distinct advantages. First and foremost is the time and effort saved by both patient and dentist as fewer appointments and less manufacturing is needed to fit the restoration. CEREC technology also limits the need for enamel removal because of the increased degrees of accuracy involved using computer-guided technology. Also, because the crown or inlay can be milled from a single piece of porcelain it preserves a greater degree of strength than layered or pressed ceramics. The ability to store any design and manufacturing information on a computer means that any subsequent alterations or replacements can be easily manufactured without further imaging.

CEREC is most commonly used to manufacture dental crowns and filling inlays to repair teeth that have been damaged by dental trauma or tooth decay. The ceramic restorations are firmly secured to the teeth with composite resin bonding creating a solid and resilient shield against any further damage to the damaged tooth.

vvv

Talk to Us

To talk to us about ending denture worries with fixed implants, call Aqua Dental on 020 8819 1548 or get in touch through our contact form.